单向收费岛模具 双向收费岛模具厂家集中在高速公路收费站，以进口和出口使用为主，单向收费岛模具 双向收费岛模具厂家设置的形状多为锥形，就是为了起到车辆的防撞作用，而且锥形的构造可以保证有效的视野，对于收费安全工河北立体车库 消防报警器塑料配件 电缆接地箱 电缆保护接地箱 塑料土工格栅 消弧线圈装置 作起到一定的保障作用。常用收费岛模具的规格主要是以岛尾和岛头的规格，一般常见的有两种样式，一种是连体形式，一种是分体形式，这两种规格是目前收费岛预制件使用量较多的。因为高速路口设置的进出口收费站有限，所以往往每个站口使用一套模板就可以满足，如果工期不紧张的话，整条线路的收费岛这是需要5套模具就可以满足了。因为该模具体积大，搬运不方便，往往按照现场浇筑的方式进行生产，这样的话就节省了搬运预制块的时间。
The mold manufacturers of one-way toll island and two-way toll island are concentrated in highway toll stations, mainly for import and export. The shape set by the mold manufacturers of one-way toll island and two-way toll island is mostly conical, which is to play the role of vehicle anti-collision, and the conical structure can ensure an effective vision and play a certain role in ensuring the safety of toll collection. The specifications of common toll Island molds are mainly based on the specifications of island tail and island head. Generally, there are two common styles, one is the conjoined form and the other is the split form. These two specifications are widely used in the prefabricated parts of toll island at present. Because there are limited import and export toll stations set at the expressway intersection, it is often possible to use one set of templates at each station entrance. If the construction period is not tight, five sets of molds are required for the toll island of the whole line. Because the mold has large volume and inconvenient handling, it is often produced in the way of on-site pouring, which saves the time of handling precast blocks.