网址：shoufeidao.oy56.cn 2023-08-15 作者：admin 阅读：
The molds of the toll island are used in the way of on-site grouting.
Other steel molds are used in a single piece. The toll island is divided
into two parts: the island head and the island tail. Before use, the
two molds should be assembled at a specified distance and then operated.
The island body refers to the whole toll island. After the molds are
assembled, the oil is normally applied with the oil, and then the
concrete is poured for vibration and exhaust, Demould and disassemble
after the mud solidifies, so as to complete the construction of the
island body. Similarly, the mold can be used scientifically to avoid the
problems of unqualified product quality or unsatisfactory processing
The mold specification of toll island is not complex. It is also the
design of welding between panel and rib plate. However, it should be
noted that rust will inevitably appear after long-time grouting
operation. If rust is applied, attention should also be paid to the
protection of the mold. Clean each mold immediately after removing the