收费岛模具都是现场灌浆的方式进行应用，其他钢模具为单件应用，而收费岛的话分为了岛头以及岛尾两部分，在使用之前要将两件模具以规定的距离拼装后来操作，岛体是指整个收费岛，拼装模具后正常涂刷机油后机油，紧接着开始浇注混凝土进行振捣排气，在泥浆凝固后脱模拆卸，这样便就完成了岛体的施工，同样也做到了科学使用模具，避免制品质量不合格或者是加工效果不理想的问题出现。
The molds of the toll island are used in the way of on-site grouting. Other steel molds are used in a single piece. The toll island is divided into two parts: the island head and the island tail. Before use, the two molds should be assembled at a specified distance and then operated. The island body refers to the whole toll island. After the molds are assembled, the oil is normally applied with the oil, and then the concrete is poured for vibration and exhaust, Demould and disassemble after the mud solidifies, so as to complete the construction of the island body. Similarly, the mold can be used scientifically to avoid the problems of unqualified product quality or unsatisfactory processing effect.
收费岛模具规格并不复杂，同样是面板与筋板焊接的设计，但是要注意长时间灌浆操作后难免会出现锈迹，锈迹应用的话也需要注意模具的保护，型槽模具 井盖钢模具 保定雅思 一次性止血带 保定养老院  保定水处理设备 一次性止血带  拆模后立即清洗每一件模具。
The mold specification of toll island is not complex. It is also the design of welding between panel and rib plate. However, it should be noted that rust will inevitably appear after long-time grouting operation. If rust is applied, attention should also be paid to the protection of the mold. Clean each mold immediately after removing the mold.