常用收费岛模具的规格主要是以岛尾和岛头的规格，一般常见的有两种样式，一种是连体形式，一种是分体形式，这两种规格是目前收费岛预制件使用量较多的。因为高速路口设置的进出口收费站有限，所以往往每个站口使用一套模板就可以满足，聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 如果工期不紧张的话，整条线路的收费岛这是需要5套模具就可以满足了。因为该模具体积大，搬运不方便，往往按照现场浇筑的方式进行生保定送水 保定骨伤骨病 铜鼎铜钟 淤泥固化设备 保定舞蹈 化粪池钢模具 保定网站建设产，这样的话就节省了搬运预制块的时间。
The mold manufacturers of one-way toll island and two-way toll island are concentrated in highway toll stations, mainly for import and export. The shape set by the mold manufacturers of one-way toll island and two-way toll island is mostly conical, which is to play the role of vehicle anti-collision, and the conical structure can ensure an effective vision and play a certain role in ensuring the safety of toll collection. The specifications of common toll Island molds are mainly based on the specifications of island tail and island head. Generally, there are two common styles, one is the conjoined form and the other is the split form. These two specifications are widely used in the prefabricated parts of toll island at present. Because there are limited import and export toll stations set at the expressway intersection, it is often possible to use one set of templates at each station entrance. If the construction period is not tight, five sets of molds are required for the toll island of the whole line. Because the mold has large volume and inconvenient handling, it is often produced in the way of on-site pouring, which saves the time of handling precast blocks.