收费岛模具在生产制作产品的时候，使用的材料非常常见，就是我们生活中常使用的混凝土，混凝土的使用非常频繁，混凝土的购买非常容易，一般各地都有出售的，所以我们在生产的时候，不管是预制生产还是现浇生产制作，在混凝土的购买上都不用担心，一般都是可以就地取材的，我们在购买的时候，一定要对材料进行测试，只有生产之后的产品强度达到M7.5以上，才能够算合格，否则就算生产出来产品，那么质量也是没有保证的，一般非常容易损坏。我们都知道利用水泥制作出来的混凝土收费岛模具产品一般都是灰色的，这样在进行收费的地方就非常的不明显，很容易发生碰撞，所以我们在生产出来的这种混凝土收费岛模具产品之后，要对水泥产品进行抛光打磨，然后在上边刷上黄黑条纹的荧光漆，两种油漆的界线应该分明，不能有晕染，所以我们在刷漆的时候一定不能选择潮湿的天气或者冬天，这样是会影响刷漆的效果的。
The materials used in the production of toll Island molds are very common, that is, the concrete often used in our life. The use of concrete is very frequent, and the purchase of concrete is very easy. Generally, it is sold everywhere. Therefore, we don't have to worry about the purchase of concrete, whether it is prefabricated production or cast-in-situ production, Generally, local materials can be obtained. When we buy, we must test the materials. Only the product strength after production reaches M7 5 or above can be considered qualified. Otherwise, even if the product is produced, the quality is not guaranteed, and it is generally very easy to be damaged. We all know that the concrete toll Island mold products made of cement are generally gray, so it is not obvious at the place of charging, and it is easy to collide. Therefore, after the concrete toll Island mold products are produced, we should polish the cement products, and then brush the fluorescent paint with yellow and black stripes on the top, The boundary between the two paints should be clear and there should be no halo, so we must not choose wet weather or winter when painting, which will affect the effect of painting.